Piping
Bulk Materials:
 Pipes (Seamless,
SAW, ERW) either in carbon steel, or galvanized or stainless
steel in all sizes and in accordance with
all Codes & Standards.
Supplying
new certified API CASING/TUBING & DRILL PIPE.
Fittings,
Flanges & Valves in all grades, sizes & materials.
Steel Structures
(Angles, Beams, ...etc.) in all types & sizes.
Studbolts
& Gaskets in different materials & sizes.
Plates &
Raw Materials for vessels, tanks & heat exchangers.
Instrumentation
Materials (Tubing, Compression Fittings, & Manifolds).
Electrical
Equipment (Cables, JB, & Lugs).
Ductile Cast Iron Pipes & Its Fittings:
 PIPES
We can supply sizes of DN80mm to DN2000mm in 6 meters length
and in accordance with ISO 2531, ISO 4179 and ISO 8179 with
following sizes of:
DN80mm, DN100mm, DN150mm, DN200mm, 250mm,
DN300mm, DN350mm, DN400mm, DN450mm, 500mm,
DN600mm, DN700mm, DN800mm, DN900mm, DN1000mm,
DN1200mm, DN1400mm, DN1600mm, DN1800, and
DN2000mm.
all pipes manufactured by centrifugal process to ISO2531 (K9).
Internal Coating with cement mortar by centrifugal process
To ISO4179 where External Coating by metallic Zinc in
accordance to ISO8179 and then covered by Bituminous
paint according to BS3416.
Ductile
Iron Fittings
The joints of fittings are according to ISO2531 and client
requirements.
The class of the Fittings wall thickness is as follows:
K9 class for weld-on flanged pipes
K14 class for Tees and Crosses.
K12 class for the other fittings.
The External Coating of the fittings will be by Zinc coating
And Bitumen spraying according to ISO8179 where Internal
Coating will be by Cement lining according to ISO4179.
Pipeline Leak Detection System
1. Fast detection time-ASI ALDS
usually detects leak within one minute from occurrence ‐
typically less than 30 seconds;
2. Accurate leak location -calculating
leak location with uncertainty of 30 meters or better.
3. Detecting leak with high sensitivity
-able to detect small leaks, typically 1% or less of normal
flow rate and able to detect leak with shut-in flow.
4. Applications include both
liquid and gas pipelines, and consists of
Single transmission lines, networks, gathering lines, and
transfer
lines.
5. ALDS is also the only system
with established reliable performance-
very few false alarms- which has been used not only for pipeline
monitoring but also for automatic control of shut-in valves.
6. Minimum maintenance requirements.
7. Local module based ALDS continuously
detects leaks, even under
loss off communications.
Sewage Treatment:
Either for Off-Shore, Marine, & Land and are extended
biological
aeration systems, self contained and delivered to site ready
to
operate once electrical and connections are in place. Capacity
ranging from 50GPD to several hundred thousands GPD. Readily
adaptable to extreme changes in volume treated due to seasonal
usage demands.
Water
Treatments:
R.O units
in different capacities & water types (Sea, brackish)
Filters
in different sizes & types.
R.O. membranes.
Lightning Protection Systems:
Our principal can provide a complete lightning prevention
package suitable for your individual requirements through
Static Dissipators, Grounding Systems, and Surge Protection.
This system are UL listed as well as the system too.
Our principal are able to install a complete system or supervise
your contractor.
Alternative
Fuel Systems:
We introducing world leader manufacturer and exporter of LPG
and CNG conversion system kits for:
Vehicles
(Automobile, Lorry, & Buses.
Generators
(only with battery).
Boats and
Yachts.
Electromechanical Supplies
"Packages":
When new industrial plants or power stations are constructed
or when they must be expander or have maintenance, engineering,
contracting companies or end-users are need of different types
of materials. The material take of specifications include pipes,
fittings, plates, bolts, valve and many other components in
various material grades in large quantities for manufactures
production or small quantities which only stockiest can supply.
Purchasing
all these items from the very specialized suppliers, manufactures
means splitting the MTO to many separate orders and handling
can become a major management problem. Instead of concentrating
on getting the job finished, time is lost manpower is tied
up with expediting and coordinating many different orders.
Our long
experience and knowledge of MRO materials and the enable us
to supply complete packages for his type of requirement against
competitive prices and ensuring deadlines are met. Our wide
range of products cover most of our customers needs.
|
